Wiper Fitment

What Size Windshield Wiper Blades for Hyundai Palisade?

Kyler Brown
0 comments
What Size Windshield Wiper Blades for Hyundai Palisade? What Size Windshield Wiper Blades for Hyundai Palisade?

Last verified: Sep 21, 2026

The Hyundai Palisade launched in 2020 and, unlike most vehicles in this series, hasn't gone through a full redesign since — so unlike the Honda CR-V or Nissan Sentra, wiper blade sizes have stayed the same across every model year so far. That consistency is actually part of why Palisade owners run into confusion: several third-party sites list slightly different numbers for the same years, and the mismatch has shown up in Palisade owner forums as real buying mistakes.

This guide provides Hyundai Palisade windshield wiper blade sizes by year so you can find the correct fit quickly. If you're looking for wiper blade sizes for other vehicles, see our windshield wiper blade size guide by vehicle.

Hyundai Palisade Windshield Wiper Blade Sizes by Year

Model Year

Driver Side

Passenger Side

Rear

Connector

2020–2025

26"

20"

12"

J-Hook

Note: The Palisade has used the same wiper blade sizes across every model year since launch, but you may see other sites list 24"/19" instead of 26"/20" — that mismatch has confused enough owners that it's come up on Palisade forums directly. 26"/20" matches OEM parts listings. If your ever unsure, Windy's Right-Size Guarantee has you covered.

Shop Hyundai Palisade Wipers

Ready to Replace Your Hyundai Palisade Wipers?

Now that you've found the correct sizes, shop premium windshield wiper blades designed specifically for your Hyundai Palisade.

  • Right Size Guarantee

  • Natural rubber for quiet, streak-free performance

  • Vehicle-specific fit

  • Free shipping

Hyundai Santa Fe windshield wiper blades

Shop Hyundai Palisade Wipers

Does the Hyundai Palisade Have a Rear Wiper?

Yes — every Palisade model year includes a 12” rear wiper. Online sources differ on the exact rear blade length, but an incorrect size can lead to coverage issues.

How to Install Wiper Blades on a Hyundai Palisade

The Palisade uses a J-Hook style connector on the front blades:

  1. Lift the wiper arm away from the windshield until it locks in the upright service position.

  2. Lift the small release tab on the underside of the blade where it meets the hook.

  3. Slide the old blade down and off the arm.

  4. Slide the new blade onto the hook until it clicks securely into place.

  5. Repeat on the opposite side, then lower each arm slowly, keeping a hand on it so it doesn't snap back against the glass. 

Why Correct Wiper Blade Size Matters on the Palisade

Because the Palisade is a large three-row SUV with one of the widest windshields in its class:

  • Even a half-inch size mismatch is more noticeable on a windshield this wide, since it leaves a longer uncovered strip than on a compact car

  • The driver and passenger sides use notably different lengths (26" vs. 20"), so a "one size both sides" universal kit is a common mistake

  • Some Palisade owners have reported OEM replacement blades smearing after only a few weeks of use, even when correctly sized — which points to blade quality, not sizing, as a separate issue worth considering when choosing a replacement

Hyundai Palisade Wiper FAQs

Why do some sites list 24"/19" instead of 26"/20" for the Palisade? 
This appears to be a data error that's been repeated across multiple fitment sites and even print sources; 26"/20" is confirmed by OEM parts listings and the majority of fitment databases.

Has the Palisade's wiper size changed since it launched in 2020?
No — the Palisade has used the same front blade sizes across every model year so far, since it hasn't been through a full redesign yet.

Why Choose Windy Wiper Blades?

Windy blades are designed specifically for your vehicle and feature:

  • Premium natural rubber for smooth, quiet performance

  • Vehicle-specific fitment

  • Pre-installed adapters

  • Easy installation

Shop Hyundai Palisade Wipers

Related Vehicle Guides